SeaTec Single Brush Cleaning Tool
Ordering Codes: SeaTec-SBCT
The MKII Hydraulic Hand Tool is a multipurpose hydraulic machine which can be used for many operations. There are several different types of brush available which can be used for hull cleaning operations in areas that are too tight for access with other cleaning machines. The optional polishing adaptor will convert the tool for propeller polishing operations. The high RPM high torque tool is ideal to achieve high quality propeller surface finishes. There is a range of pads available, all of which can be attached using a simple velcro pad system. A shaft adaptor kit is also available that allows the tool to be used for drilling and grinding.
Specifications:
- Dimensions : length 480mm, width 230mm, height 200mm nominal
- Weight in air : 5kg
- Weight in seawater : 6kg
- Max speed : 3200 rpm
- Min speed : 500 rpm
- Max working pressure : 172 bar
- Torque at 3000 rpm : 35 Nm (26 lb.ft)
- Operating temperature : Min: 0°C / 32°F Max: 65 Max: 65°C / 150°F
- Return line pressure : 30 bar intermittent (cold oil)
- Typical hose requirements Length: 50m
- Supply hose diameter : 16mm ID
Operation:
The tool is provided with a guarded on/off trigger. A spring detent can be used to lock the trigger in the on position and can easily be released by the diver.
Configuration Options:
- Flanged output shaft (standard option) – 6 bolt fixing to suit a range of propeller polishing and hull cleaning brush attachments
- M30 shaft adapter will accept a range of tooling for surface finishing (abrasive discs), wire brushing and drilling
- Extension handle to give greater torque control
Additional information
Options: | 50m, 100m |
---|